Note：If the tire or rim processing errors, tires may burst or rupture, may damage the rim and spread, may therefore result in serious injury or death。
Tires and rims maintenance, disassembly, repair, and installation requires special equipment and expertise, so to make a tire repair shop to carry out, or by specially trained personnel to carry out, and comply with all relevant safety regulations。
Recommends using dry nitrogen (N2) to fill the tires. If the tires originally filled with air, it is recommended to adjust the pressure with nitrogen, the nitrogen may be mixed with the atmospheric gas. Tires filled with nitrogen to reduce the possibility of explosion, which is due to the nitrogen gas is non-combustible. Similarly nitrogen helps to prevent oxidation and corrosion aging rubber and rim parts。
Check and adjust tire inflation pressure in the rear tires should be carried out sufficiently cooled. The same nitrogen inflated tire pressure and the air pressure of the pneumatic tire. Ha loaded recommends, based on the use of the machine to select the operating mode of the tire inflation pressure。

Note：If this machine over long distances at high speed, each traveling 45 kilometers, 30 minutes should stop for a tire full heat。