After work each day to check:

1) Check the fuel reserves.
2) Check the engine oil sump and clean the case, if found too high and thinning the oil, should find out the cause and be excluded.
3) Check the tubing, pipes, pipe and various accessories for leakage.
4) Check the transmission, torque converter, hydraulic pumps, steering, front and rear axles fixed seal and the presence of overheating.
5) Check the rim bolts, and each pin driveshaft bolts loose or fall off.
6) whether the normal working device.
7) Check the tire pressure is normal appearance and.
8) the temperature is below 1 ℃ (near freezing) when the cooling water release, if you have added antifreeze, do not release. (Note: The loader factory not add antifreeze).
9) inspection equipment and various parts of the shaft sleeve lubrication.
10) Clean machine appearance and inner bucket of mud and debris.